User Tools

Site Tools


diy_fume_extractor

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

diy_fume_extractor [2014/08/31 10:12] (current)
willo created
Line 1: Line 1:
 +Powercord originally had a filter just like the one that this project is based on. I have to admit that when I took ours apart, I had the same thought as the author of this one.
 +Wood frame: check.
 +Another fan: check.
 +Filter media: check.
  
 +[[http://​www.instructables.com/​id/​Build-a-laser-cutter-fume-extractor/​]]
 +
 +====== Parts list just in case ======
 +    Qty (1) Fantech Inline Exhaust Fan, 392 CFM, Centrifugal for 6" Duct
 +    Qty (1) 29500 Honeywell Air Cleaner Replacement Filter
 +    Qty (2) 3M Filtrete Air Conditioner Filter, 15-Inch by 24-Inc
 +    Qty (1) Duck Brand 1285234 24-Inch by 15-Inch by 1/4-Inch Foam Air Conditioner Filter
 +    Qty (1) 55lb bag of activated carbon (I called them and spoke to Karrie Gibbons. Just ask for "4 by 8 coconut shell carbon, for vapor filtration"​)
 +    Qty (1) Harbor Freight Router Speed Controlled
 +    Qty (1) Roll of squishy neoprene shelving liner (It's about 1/8" thick, soft, makes great gaskets)
 +    Qty (4) 2inch casters
 +    Qty (1) 3/8" Romex clamp or cord strain relief
 +    Qty (4) 3/8inch threaded rods
 +    Qty (8) 3/8inch nuts
 +    Qty (4) 3/8inch wing nuts
 +    Qty (8) 3/8inch washers
 +    Qty (1) 5' roll of window screen
 +    Qty (1) 5' roll of 1/4" wire cloth
 +    Qty (1) tube silicon caulking
 +    Qty (1) 3/8" dowel pin (for the router jig)
 +    An old extension cord (we only need the male end)
 +    4'​x4'​ piece (half a sheet) of 3/4" thick birch plywood smooth on both sides.
 +    Mat board
 +    Weather stripping (I had leftovers from other projects, but basically 1/4" thick, foam)
 +    Qty (1) Roll of post filter material (updated!)
diy_fume_extractor.txt ยท Last modified: 2014/08/31 10:12 by willo